- mp522 precision ph/conductivity meter
-
-
suitable for scientific research, quality control, biotechnology, fine chemicals, precision areas such as acid-base titration ph and conductivity measurements.
-
| ●meter meets with the requirement of international glp standards. its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, rs-232 output, function setting and self-diagnose etc. |
| ● there are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode. |
| ● automatically recognize 13 kinds of ph buffer solution. user can choose anyone from four series of standard buffer solutions: europe & usa series, nist series, china series and self-defined series. |
| ● high purified water and ammonia added purified water ph measuring mode can be set up, especially suitable for electric power and petrochemical industry. |
| ● with eh redox potential measuring mode can directly display orp value which against standard potential of hydrogen electrode. |
| ● automatically recognize 8 kinds of conductivity standard solution. user can choose anyone from two series of solutions: europe & usa series and china series. |
| ●adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (k=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration. |
| ●automatically select conductivity measurement range, when measuring high pure water, equipment automatically enter into temperature compensation of nonlinear model, especially for electricity, microelectronics and the pharmaceutical industry requirements. |
| ● meter has the only product serial number. |
| ● dustproof and waterproof meter meets ip54 standards. all sockets are seal protected by the silica gel caps. |
|
ph |
measuring range
resolution
accuracy
input current
input impendance
stability
temp. compensation range |
（-1.999 ~ 19.999）ph
0.1/0.01/0.001 ph
meter:±0.002 ph, connect meter with electrode:±0.01ph
≤1×10-12 a
≥3×1012 ω
±0.002 ph/3h
(0 to 100) ℃（automatic or manual） |
|
mv |
measuring range(mv/orp/eh)
resolution
accuracy |
-1999.9mv ~ 0 ~ 1999.9mv
0.1mv
±0.03% fs |
|
conductivity |
measuring range
resolution
accuracy
temp. compensation range
electrode constant
reference temperature |
conductivity：（0.00~20.00）μs/cm （20.0~200.0）μs/cm
（200~2000）μs/cm （2.00~20.00）ms/cm
（20.0~200.0）ms/cm （200~2000）ms/cm（k=10）
resistivity：（0 ~ 100）mω·cm
tds: （0 ~ 100）g/l
salinity： （0 ~ 100）ppt
0.01/0.1/1μs/cm 0.01/0.1/1 ms/cm
meter:±0.5% fs,connect meter with electrode:±0.80% fs
（0 ~ 50）℃（automatic ）
0.1 / 0.5 / 1 / 5 / 10 / 50 / 100 cm-1
25℃、20℃ and 18℃ |
|
temperature |
measuring range
resolution
accuracy |
-10℃~ 110℃
0.1℃
5~ 60℃range：±0.4℃ other range：±0.8℃ |
|
other technical parameters: |
data storage
storage content
power
communication connector
size and weight
quality and safety certification |
300 groups
measuring value series number, measuring value, temperature, atc or mtc state, measuring date and time
dc9v/300ma
rs232
160 × 190 × 70mm/880g
iso9001:2008, ce and cmc |
|
working condition |
environment temperature
environmental humidity
ip rating |
5 ~ 35 ℃（0.01grade） 15 ~ 30 ℃（0.001grade）
≤75%
ip54 dustproof and waterproof |
| 1. model mp522 precision ph/conductivity meter | 1set |
| 2. model 602 flexible electrode holder | 1pc |
| 3. 201t-m plastic ph/atc three-in-one combination electrode | 1pc |
| 4.2503-c glass ph combination electrode | 1pc |
| 5. mp500 temperature electrode | 1pc |
| 6. 2401-m conductivity electrode | 1pc |
| 7. ph standard buffer solution（ph4.00, ph7.00 and ph10.01/50ml） | 1btl/each |
| 8. 1413μs/cm conductivity standard solution（50ml） | 2btls |
| 9. 9v power adapter（meter use）e | 1pc |
| 10. rs-232 communication cable | 1pc |
| 11. mp522 communication software disk | 1pc |
| 12. operation manual | 1unit |
| 13. brief operation instruction | 1unit |
| 14. packing list | 1pc |
|
accessory categry |
description |
specifications |
|
ph combination electrode |
201-c plastic combination ph electrode |
suitable for routine ph measurements, widely used, bnc connector。 |
|
200-c plastic combination ph electrode |
suitable for routine ph measurements, long continuous, high precision, bnc plug. | |
|
206-c plastic combination ph electrode |
smaller diameter electrode, suitable for small diameter container in a test, bnc connector | |
|
201t-m plastic three-in-one combination ph electrode |
simultaneous measurement of ph and temperature, automatic temperature compensation, bnc rca plugs. | |
|
2501-c glass combination ph electrode |
for precise ph test, routine laboratory use, bnc plug. | |
|
2503-c glass combination ph electrode |
for precise ph test, used to measure complex samples, bnc plug. | |
|
2503d-c glass combination ph electrode |
for low-temperature solution and pure water ph measurement, bnc plug. | |
|
2503g-c glass combination ph electrode |
suitable for high temperature solution ph measurements, bnc plug | |
|
2503s-c glass combination ph electrode |
for acid and high-temperature solution ph measurements, bnc plug. | |
|
2015p-c plane combination ph electrode |
for the surface and trace solution ph measurement, bnc plug. | |
|
conductivity electrode |
djs-0.1-m pure water conductivity electrode |
k=0.1 cm-1，automatic temperature compensation, for testing the conductivity of high pure water, 4-pin plug |
|
2401-m glass conductivity electrode |
k=1.0 cm-1，automatic temperature compensation, precision laboratory test for conductivity, 4-pin plug. | |
|
2301-m plastic conductivity electrode |
k=1.0 cm-1，automatic temperature compensation for laboratory and field testing, 4-pin plug. | |
|
2310-m plastic conductivity electrode |
k=10 cm-1，automatic temperature compensation, used to test seawater and concentrated salt water, etc., 4-pin plug | |
|
glass flow cell |
equipped with djs-0.1-m electrode | |
|
orp composite electrode |
301pt-c plastice orp combination electrode |
orp measurement for conventional, wide range of uses, bnc plug |
|
3501pt –c glass orp combination electrode |
orp measurement of routine laboratory, test stability, fast response, bnc plug | |
|
temperature electrode |
mp500 temperature electrode |
stainless steel housing, fast response, high accuracy, rca plugs |
|
ph buffer |
ph4.00 buffer |
500ml/250ml/50ml（bottle） |
|
ph6.86 buffer |
500ml/250ml/50ml（bottle） | |
|
ph7.00 buffer |
500ml/250ml/50ml（bottle） | |
|
ph9.18 buffer |
500ml/250ml/50ml（bottle） | |
|
ph10.01 buffer |
500ml/250ml/50ml（bottle） | |
|
conductivity calibration solution |
84 μs/cm conductivity calibration solution |
500ml/250ml/50ml（bottle） |
|
1413 μs/cmconductivitycalibration solution |
500ml/250ml/50ml（bottle） | |
|
12.88 ms/cmconductivitycalibration solution |
500ml/250ml/50ml（bottle） | |
|
146.6 μs/cmconductivitycalibration solution |
500ml/250ml/50ml（bottle） | |
|
1408 μs/cmconductivitycalibration solution |
500ml/250ml/50ml（bottle） | |
|
12.85 ms/cmconductivitycalibration solution |
500ml/250ml/50ml（bottle） | |
|
electrode soaking |
ph（orp）combination electrode soaking solution |
500ml/250ml/100ml（bottle） |
|
10-5 mol/l sodium ion electrode soaking solution |
equipped with 7801sodium electrode . 500ml/250ml/100ml（bottle） | |
|
orp standard solution |
222 mv orp standard solution |
250ml/100ml/50ml（bottle） |
|
electrode holder |
model 602 flexible electrode holder |
nice appearance of the arc-type bracket, you can turn 360 degrees and vertical lift |
|
model 601stirring type electrode holder |
the electrode holder and magnetic stirrer combination of new products. | |
|
model 600 electrode holder |
cheap simple electrode holder |
